TYNKSIL S
TYNKSIL S
Silicone - Silicate render
EAN: 2000000000510
TYNKSIL® S PLUS is a high quality render mortar produced on the basis of water silicone dispersion and potassium water glass, with specially selected mineral fillers, pigments, modifiers and reinforcing fibres. It is characterized by excellent adhesion and easy application, resistant to weather conditions and mechanical damage. Due to the composition, the product is vapour-permeable, flexible, resistant to dirt and well protected against the growth of mould, fungi and algae.
Volume: 25Kg
Discover the product lineApplication
TYNKSIL® S PLUS is used for decorative, thin-layer rendering both inside and outside. It constitutes a protective and highly decorative finishing of facade when insulating walls with LAKMA® TERM insulation systems and on cement, cement-limestone, concrete or adhesive mortar SYNTEKOL® PSW. When insulating, where the outer layer is TYNKSIL® S PLUS, it is recommended to use only the materials included in LAKMA®TERM insulation systems.
Technical specification
Application
trowel
Proper amount of water
300 ml to 700 ml / 25 kg
Drying time
8-12 h.
Time of full curing
approx. 48 hours
Application temperature
od +5°C do +25°C
Efficiency depending on grain thickness and structure - dashed structure render
1,5 mm - 2,30 to 2,60 kg/m²
2.0 mm - 2,90 to 3,20 kg/m²
2.5 mm - 3,30 to 3,60 kg/m²
3.0 mm - 3,60 to 3,90 kg/m²
Colours
500 colours of LAKMA colouring system
